Solware Ltd QB78 Deluxe CO2 to PCP Conversion Kit – exclusive to Solware Ltd

Exclusive to Solware Ltd! - Solware Ltd QB78 Deluxe CO2 to PCP Conversion Kit


This is a genius kit as with the QB78 deluxe it’s a great gun but notorious weak in power not 10 ft/lbs as stated by SMK. This kit has been developed which increases the power to over 11ft/lbs. You no longer use CO2 capsules as this adaptor allows you to fill the gun using air so converting to PCP. You MUST READ and follow the instructions as provided with the kit. DO NOT FILL OVER 120 bar by doing so you risk damaging the internal seals. This kit is universal and works on .177 and .22. We recommend that a qualified gunsmith fits this kit.


Contents:
1 x CO2 to PCP air valve conversion adaptor (as above)
Spare Seals
1 x Transfer Port seal

You are supplied with everything you require inc spare seals and also an instruction leaflet. CO2 to PCP air valve conversion has been tested and held at a pressure of 200bar then set the valve with thread adhesive. It is safe to use at 110 to 120bar maximum otherwise damage will result to valve seats, seals and structure of the gun.
A Transfer Port seal provided will withstand the higher working pressure and must be fitted at the same time as the input valve to avoid seal leakage, gun damage and produce reliable results. The firing valve will be good for many shots if the pressures are not excessive.

http://www.solware.co.uk/air-pistol-air-rifle/QB78-Deluxe-CO2-to-PCP-Conversion-Kit.shtml